Minimizing the carbon footprint while we can't resort to clean production methods
There is a well-known need to abandon fossil fuels and invest in renewable energies, towards the decarbonization of the economy and the objectives set out in the Paris Agreement.
The road to decarbonization implies a profound change in the current fossil fuel-based economic model. This will require a strong commitment to energy efficiency, innovation, and renewable-based electrification.
The share of fossil fuels in the energy mix is expected to fall gradually. By 2040, oil, coal and natural gas are expected to account for only about ¼ of primary energy consumption. Renewable energies will gain more and more importance in the world's energy consumption.
But what can be done in the present scenario? What is to be done until cheaper technologies are created, on a larger scale, to produce renewable energy on various fronts and meet the growing energy demands of the world's population? For end users, this involves reducing their day to day energy consumption; for producers, it means focusing on the development of renewable energies, mitigating the impact of fossil fuels, and finding new strategies to offset any damage caused to the planet.
In order to understand how to minimize the environmental impacts of thermoelectric plants (those that produce electricity by burning coal), we need to know more about such impacts.
Do you know how electricity is produced in a coal-fired power plant?
Briefly put, finely milled coal is burnt in large boilers whose heat is then used to heat up water. This high-temperature heated water releases steam, which makes turbines move. And it is the movement of these turbine blades that activates a generator and produces electricity, which is then transformed into the electric current we use in our homes.
And what waste is produced in this process? Most people believe that global warming and the release of polluting gases are the most worrisome consequences of coal-based energy production. But in fact, besides gaseous pollutants (such as sulfur oxide and nitrogen oxide), coal combustion produces three kinds of solid waste:
These solid products (ash and gypsum) could be simply ignored or perceived as waste, about which there is little one can do. But with the introduction of the concept of clean coal, thermal power plants have begun to implement technologies capable of reusing these products, or in some cases contain them, thereby preventing them from being released into nature.
An example of the technologies used to prevent ash from spreading through the atmosphere and cause phenomena such as acid rain (which was so widely discussed in the 1980s and 1990s) are the so-called electrostatic precipitators. These consist of smoke circuit plates that attract ash and transport it to storage silos.
Bottom ash, on the other hand, may also be stored and reused if plant boilers are equipped, for instance, with a wet removal system.
Instead of being simply deposited in landfills, these ashes can be reused, as in Sines Thermoelectric Plant, where 15 to 20 trucks are loaded with ash every day.
This material is used for several purposes, especially in the construction area. For instance, all Euro 2004 football stadiums in Portugal were built with ash from this plant.
Desulfurization (deSOX) is another way of giving back to the Planet part of what is consumed when generating electricity from fossil fuels. The term 'desulfurization' means a chemical process that transforms sulfur dioxide (SOx, a pollutant gas) into a raw material that can be used for several purposes: gypsum. The Sines thermal power plant uses this technology and produces 15 to 20 trucks of gypsum per day. Want to see how it works?
Thus, aside from producing electricity, the Sines power plant is also a gypsum factory, boosting the reuse of waste material which would otherwise be deposited in landfills. In the year 2017, with a coal consumption of about 3.6 million tons, 140,000 tons of gypsum were produced. These are sold in the domestic and international market for different purposes, such as plasterboard and other applications.
Like sulfur dioxide, which we have already discussed, pollutant gases resulting from the burning of coal also include nitrogen oxide (NOx). Aside from being responsible for the production of azotic acid, which then results in acid rain, this gas is harmful to the respiratory system.
European regulations, which have lowered emission limits for these gases, have led to the development of new technologies capable of eliminating them effectively. Such is the case of denitrification (deNOx) technology: SCR - Selective Catalytic Reduction.
SCR is a method for converting nitrogen oxide (NOx) into nitrogen (N7 - which we naturally find in the atmosphere) and water using a catalyst. It is one of the most cost-effective nitrogen oxide reduction technologies, as its efficiency in eliminating NOx can reach 90%.
The Sines Thermoelectric Plant is a conventional EDP plant that uses imported low-sulfur coal as fuel. With an installed capacity of 1,256 MW, it consists of four identical, mutually independent generator sets, each with an electrical output of 314 MW.
The first generator set went into operation in 1985. In full operation, it accounts for about 15% of Portugal's entire energy consumption. One of the most recent power stations in the Iberian Peninsula, Sines is also among the three most efficient coal-fired plants in that area.
In 2017, due to a high-efficiency rate of 37.8%, the Sines power plant boasted a CO2 emission factor of 0.89 TonCO2/MWhe (an 8.396,3 ktonCO2 emission against 9426 GWh of electricity generated) - probably among the lowest in the Iberian Peninsula.
Such efficiency is partially due to the company's investment in desulfurization and denitrification technology. With a €180 million investment, the Sines desulfurization system was completed in late 2008 and allowed for a reduction of sulfur oxide emissions by more than 90%. EDP has two other coal-fired plants in the Iberian Peninsula: Soto Ribera and Aboño (Spain). Although older than Sines, these were the first EDP plants to implement desulfurization and denitrification technology; with an overall investment of €112 million (€92 million in deNOx), Aboño and Soto completed their denitrification in 2016 and 2017, respectively.
In Sines, the implementation of the Selective Catalytic Reduction (SCR) process in 2011 required an additional €100 million investment, which has significantly reduced the emission of nitrogen oxides (above 80%).
The result of this effort? More confidence and more recognition of the competent entities materialized in environmental certifications by ISO 14001 and Registration by the Eco-Management and Audit Regulation.